how to paint a kitchen sink

If your kitchen sink, though still operational, is looking a bit worse for wear you may merely want to repaint it. This is an easy trick that takes a few steps and will work on any sink — from one you are just now trying to make fresh again, or simply wanting it to match your fabulous room, this DIY will get the job done. A complete tutorial to walk your through the entire madness.

Building a Fence Post_extract

Cleaner: Non-abrasive cleaner for preparing the sink.

After that, I sanded the surface with fine-grit sandpaper (220-400 grit)

Roll of Painter’s Tape (to protect bordering areas)

Plastic drop cloth or sheeting: To cover your countertops and floors.

Sealer that is sink appropriate High-quality primer

Epoxy or Acrylic Based Paint– Durable and quick drying, can be used on various surfaces. Recommended for high traffic areas.

Paintbrush or Foam roller: For painting.

* Gloves, mask and safety glasses

Can of clear sealant if you want it to be more durable.

Step-by-Step Instructions

Clean the Sink:

Clean the sink of any debris—it would be dirt, grease or soap scum and rinse with non-abrasive cleaner. Rinse it off next, and let the soap to dry totally.

Sand the Surface:

Use fine-grit sandpaper and gently go over the sink from top to bottom. At the time, to enamel paint has have a good grip on something it is better if you will roughen up surface and remove any flaking off of existing coatings. Wipe the dust with slightly wet tissue or cloth and let it dry.

Take off the mask and guard the surrounding areas

Tape off the rim of the sink and fixtures with painter’s tape. Place a drop cloth or plastic sheeting into the counters to keep the paint from going on floors and other counter tops.

Apply Primer:

He painted or rolled on a primer from the kit (Image 1),covering all exposed sink areas. Make sure to spread that around as evenly as you can over the entire area. A primer serves as the perfect platform for the paint to cling on to and increases longevity. Make sure to allow the primer to dry as per its instructions

Paint the Sink:

After the primer has been applied and permitted to dry, paint the first of two coats for epoxy or acrylic. Apply even thin strokes to avoid drips and make the finish smoother and seamless. Allow to dry completely before applying the next coats. Two to three coats of paint are often needed to reach this level.

Step 9: (Optional) Clear Sealer Coat

Step 13: Protect the painted surface with a clear sealant. This just helps to protect the paint from chipping and stops the colour from washing out or running in between wears. Pour it out and adhere it to the surface being worked on according to the manufacturer’s instructions.

Allow the Paint to Cure:

Wait 24-48 hours after your final coat of paint before you seal the sink, if you decide to do so. Do I have to let the paint fully harden and set into the surface before tape it off?

Pull off the masking tapes and clean up.

Now, remove your painter’s tape and clean up any drips. Check your sink for touch-ups as soon as possible.

Tips for a Successful Project

Proper air flow: Be sure to ventilate the room when painting; you do not want toxins in your exhaled breath.

Wait: Be patient and let each layer dry and cure so the finish will be completely strong.

The good stuff: =Quality primer and paint like what is made for sinks.

There are steps you can take with your kitchen sink to give it that cool painted-finish look. Happy painting! 🎨🚰

1: Home Tuff 2: Repaint Now