As an Amazon Associate I earn from qualifying purchases.
Moen kitchen faucet with sprayer is not that difficult to remove of course there are underneath the proper way how to do it. The guide will show you step by step.
Step 1: Tools and material

The Wrench: Like the spanner but this adjustible wrench allows you to tighten or loosen nuts.
Telard — My guess is that Telard itself is a brand name, because it often refers to basin wrench. I still understand.
You will need to Phillips or flat-head screwdriver (depending on the size of your faucet.
Bucket: For stray water
Teflon Tape (for sealing threads) *optional- but you want a good seal
Flashlight click…So you can go under the sink to see.
Step-by-Step Instructions

Turn Off the Water Supply:
Gives the turning on/ off of the water shut-off valves under sink ·Therefore no leaking onto your craft desk, how awful! Release any trapped water pressure by turning the gate valve on.
Disconnect the Supply Lines:
Using an adjustable wrench, turn the hot and cold water supply lines to your faucet counterclockwise to turn them off. Bucket to catch water12
Remove the Sprayer Hose:
Find where this hose enters something like under the sink, it will probably be beneath (or above?) the same place from which it comes. Push That the quick-connect fitting Release your hands r pull this sort connected with pliers to disconnect your current hose from the tap human body.
Remove the Faucet Handle:
With this particular Moen model, you might need to pop off a handle cap with a set screw. Using a screwdriver or Allen wrench, remove the interior screw that holds handle in place.
Loosen the Mounting Nuts:
This holds the faucet to the sink as you lift it up, and will need a basin wrench to unscrew. Most of these screws will be located under the base of the faucet.
Remove the Faucet:
After you have loosened the mounting nuts, take the body of faucet as well as sprayer assembly up through sink. It might take a little wiggling to get the stopper out of its hole in the sink.
Clean the Area:
Wipe any residual plumber’s putty and debris from the sink rim, where the faucet will be installed.
Tips for a Successful Removal
Let there be light: You need a flashlight to see what you will work on, these include and not limited to the ‘pit of death’ under your sink.
Bucket (disconnect supply lines: water)
Take Your Time = Potential Mistakes and/or a Broken Something Preparation before careful trunp off of all connectors.
Therefore, you can now systematically remove a Moen kitchen faucet with sprayer and meanwhile get space for the next modification or hands–on repair. Happy plumbing! 🛠️🚰
(1) The Plumbero (2) Kitchen Reload
Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.
Leave a Reply